Angle Meter lets you measure the angle or slope. Note that you will be able to measure a variety of slope forms. You can choose to directly measure the surface by the second mode, which makes it relatively easy to measure up,or to measure the angle of the target away a short distance away from you after kilo meter. By measuring the angle from the camera aperture. This is a reference line, respectively, and the angles are measured while the display on your phone continuously. You also can take what you measure by showing the angle to keep a check on it later.
Featured
1) Real time display angle value reference by horizontal axis.
2) 2 mode for using(mode 1 and mode 2).
3) Support measure angles with the camera mode.
3.1) you can take screen short can be a target for record store at a later time.
4) Support the ability to measure the angle from the image.
5) Graphics Animation display related by mode.
6) Display 0 to 90 degree reference by horizontal axis.
7) Calibrate option for accuracy.
8) Support Level Meter allows you to measure the degree of tilt in the vertical plane and can take many forms. The measurements in each axis is locked to the screen, still more easy to measure.
***For Level Measurement
1) The three models at the same level. Including horizontal, vertical and inclined at 45 degrees.
2) Sound a warning when it finds that the measure in the horizontal plane. That is the angle measured in the plane is less than 1 degree (you can enable / disable this).
3) While the display is illuminated at all times, making the work easier (you can enable / disable this).
測角儀具有先進功能
角度計
角度計應用程序是用於測量角度或傾斜度的工具。它使用兩個軸之間的重力反正切,並根據傳感器的質量提供準確的結果。
功能
•可選擇使用相對角度模式測量不平行於地面的表面上的角度或坡度。
•角度補償的0-180或0-360度間隔。
•2個方向軸。(向左/向右或向後/向前移動設備)
•選擇將記錄保存在數據庫中,將其作為列表或圖表查看,並獲取測量歷史記錄的副本(如xls文件或圖表)。
•可選擇通過圖像測量屏幕測量圖像中物體的角度。
•圖像庫以預覽模式或詳細信息顯示圖像。
•各種自定義選項。
說明
💡 - 用戶手冊和隱私政策可在導航視圖的幫助部分中找到。
⚠️ - 要打開導航視圖,請將屏幕向右滑動,靠近屏幕左側。
⚙ - 有關自定義選項,請訪問“設置屏幕”。
📧 - 如果您需要有關如何使用此應用程序的更多詳細信息,或者您有建議使這個應用程序更好隨時給我們發電子郵件。
🛠🛠🛠測量模式🛠🛠🛠
單角度:旋轉設備並讀取角度。
兩個角度之間的差異:此模式可用於計算兩個單獨對象之間的傾斜度。觸摸角度計擋板並固定第一個角度。再次觸摸以固定第二個並查看角度之間的差異。
相對角度:如果物體不與地面平行或者表面不均勻,此模式對於測量角度非常有用。觸摸角度計擋板設置角度的第一部分,旋轉設備後再次觸摸完成測量。
氣泡水平:將您的設備放在地板上,水平和垂直測量地面角度。
客戶滿意度和反饋
⚠️重要提示:如果您發現使用該應用程序的錯誤,請在撰寫否定評論之前,使用您的手機型號名稱和問題描述寫入smarttoolfactory@icloud.com。
🤝🤝✅客戶滿意度是我們的首要任務,我們將盡快解決問題!感謝您選擇此應用。